MIL-T-45809F(AL)
3.10 Workmanship. Standards of workmanship shall assure that the welding
table shall have the stability. strength, durability, safety, and efficient
operating characteristics found in the best commercial units and as specified
4.2 Classification of inspection.
The inspection requirements specified
herein are classified as follows:
4.3 First article inspection. First article inspection shall be applied
to a preproduction model or initial production item (see 3.1). Unless
otherwise specified (see 6.2.1), first article inspection shall consist of the
examination in 4.5 and all tests under 4.6. Failure of the first article to
pass the examination or any of the tests shall be cause for rejection.
*
4.4 Quality conformance inspection. Quality conformance inspection shall
be applied to production units being offered for acceptance under the
contract. The inspection shall consist of (a), (b) and (c) below. Unless
otherwise specified (see 6.2.1), each Table shall be subjected to the
examinations and test in 4.5 through 4.7. Failure of any Table to pass these
inspections or tests shall be cause for rejection.
(a) Product examination (see 4.5).
Packaging validation test (see 4.6.2).
(c) Packaging inspection (see 4.7).