MIL-T0-45809F(AL)
2.3 Order of precedence. In the event of a conflict tween the text of
be
this document and the references cited herein (except for related associated
detail specifications, specification sheets, or MS standards), the text of
this document takes precedence Nothing in this document, however, supersede
applicable laws and regulations unless a specific exemption has been obtained.
3.
3.1 First article. When specified in the contract or purchase order, a
sample shall be subjected to first article " nspection (see 4.3 and 6.2.1).
i
3.2 Design. The table shall conform to Figures 1 through 5 and the
requirements of this specification. All dimensions shall be maintained
within
the tolerances specified herein. The welding plate shall be free from any
projection interference on the working surface. Parts subject to wear,
breakage, or distortion shall he accessible for adjustment, repair, and
replacement without modification, distortion, or damage to the table or any
table part or component
3.2.2 Threads. Threads shall conform toFED-STD-H28 and the applicable
Detailed Standard section referenced therein.
3.3 Material. Materials not specifically designated .
herein or in the
contract shall be of a quality commensurate with commercial pratice within
the producing industry, shall be suitable for the intended purpose in the
design of the end item, and shall meet allrequirements specified herein.
Materials shall be free from defects which would adversely affect the
performance or maintainablility of the individual components or the overall
assembly. It shall not be permissible to use reclaimed parts as is, or
rebuilt from' scrap or other used equipment. When dissimilar metals are used
in contact with each other, suitable protection -against galvanic corrosion
shall be applied in accordance with MIL-STD-889.
3.4 Construction. The welding table shall be furnished as a complete unit
capable of performing the functions specified herein. All of the bolts, nuts,
washers and other fasteners equired to assemble the table shall be furnished
r
with each table.
3.4.1 Welding, brazing, and soldering Welding, brazing, and soldering
shall be of a quality which shall sustain "all requirements of the welded,
brazed, or soldered parts. These operations shall not be employed as repair
measures for defective parts.
3