MIL-P-80068D
3.9 Optional and accessory equipment. Optional and accessory equipment
shall be furnished as specified and fully described (see 6.2). The equipment
listed below shall be functional without requiring modification of the
equipment or positioner for the class and size specified.
Three jaw self centering chuck.
Required repair parts shall be furnished as specified
3.10 Repair parts.
(see 6.2).
3.11 Marking on charts, and plates. All words on the machine including
all instruments, control
u n i t s , charts, plates, and related
attachments shall be in the English language. Characters shall be permanently
marked in boldface on a contrasting background. All plates shall be corrosion
resistant
3 . 1 1 . 1 Lubrication plate or chart. When specified (see 6.2), a lubrica-
tion plate or chart shall b e attached to each
positioner.
If a chart is
furnished, it shall be place: in a transparent plastic folder or permanently
sealed between clear plastic sheets. Unless otherwise specified (see 6.2), the
Points of lubricant application
Type of lubricant
S e r v i c i n g interval
SAE number or military or Federal specification for each
l u b r i c a n t (if applicable)
3.11.2 Nameplate. A nameplate s h a l l be securely attached to
each
positioner. Unless otherwise specified (see 6.2), the nameplate shall contain
the information listed below.
Nomenclature
Manufacturer's name
Manufacturer's model designation
Manufacturer's serial number
Power input (volts, total amps, phase, frequency)
Amp rating of largest motor
Table speed range (RPM)
Table tilting speed in seconds (IPM)
Positioner load capacity (pounds)
S h o r t circuit/over-current protection rating
Contract number or order number
National stock number or plant equipment code
Date of manufacture
3.12 Workmanship
Workmanship of the positioner
a n d its accessories
shall meet all requirements specified herein.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business